WeChat28d9f617ff2260b843a8d8dfb8888693.png
What is the quality inspection report of the Ministry of Public Security? Why the Ministry of Public Security detects the type test and entrusted inspection
The quality inspection report of the Ministry of Public Security is divided into two forms. 1. Commission test report. The commissioned test report only needs to send a sample test, and the test requirements are generally tested with enterprise standards. 2. Type test report. The type test report requires the public security bureau where the manufacturer is located to go to the factory for sampling, and then seal the sample and send it to the First Research Institute of the Ministry of Public Security in Beijing for testing. The testing requirements are relatively high. The cost is also relatively expensive.
Method of detection
1 Type test. Verify that the product complies with a technical specification (such as quality level, performance, safety requirements, environmental conditions, etc.) applicable to its provisions.
2 Routine test (also called factory test). Check the quality defects of product materials and processing, and test the inherent performance of products, often including functional tests and safety test items.
3 Sampling test. It is carried out when there is this requirement in the relevant product standards, and the test is also used to verify the performance and characteristics specified by the product. These regulations can be proposed by the manufacturer or negotiated by the manufacturer and the user.
4 Special test. Can be carried out according to relevant product standards and agreements between manufacturers and users to meet the diversified needs of products in the market
The general test report will indicate the time when the laboratory receives the sample and the time when the report is issued. Is there any law?
At present, neither my country nor internationally stipulates the validity period of the test report.
Since it is only responsible for incoming samples, is it meaningful to do the test?
valuable. Although it is only responsible for incoming samples, if the samples are representative, it can reflect the quality of products of the same model and batch, which helps companies control product quality risks.
Since there is no expiration date, is it reasonable for customers to request regular updates?
In reality, there is indeed a requirement to regularly send samples to detect similar products. As previously mentioned, the product test report only reflects the quality characteristics at the time of sample delivery testing, and cannot fully represent the quality status of other products of the same type. On the other hand, product quality is related to each link and condition such as material supplier, processing technology, production environment, and workers. If any link changes, it may affect product quality. Regularly updating the test report helps to eliminate the risk of product quality changes caused by influencing factors. Therefore, such a request makes sense.
What are the product range of public security testing?
Video surveillance system for security electronic products:
Black and white/color (network) camera, (network) dome camera, night vision device, low-light camera, black and white/color monitor, (LCD) display, hard disk recorder (digital/network), matrix, video server, lens, optical transceiver, Infrared light sources, law enforcement recorders, alarm image signal wired transmission devices, wireless video transmission systems, picture dividers, distributors, character overlays, video intelligent analyzers, disk arrays, storage management servers, codecs, PTZs, etc.
Intrusion alarm system
Active infrared intrusion detectors, indoor passive infrared detectors, indoor microwave Doppler detectors, microwave and passive infrared composite intrusion detectors, vibration intrusion detectors, indoor passive glass break detectors, magnetic switch intrusion detectors, Ultrasonic intrusion detectors, combined ultrasonic and passive infrared intrusion detectors, shielded microwave intrusion detectors, laser intrusion detectors, video intrusion alarms, vibration (leak) cables/optical fibers, etc.
(Intrusion/Anti-theft) alarm:
Anti-theft alarm controller, anti-theft alarm center console, perimeter guard against high-voltage power grid devices, high-voltage power grid for monitoring rooms, etc.; access control system access control controller, visitor management system, biometric access control system, palm print recognition device, fingerprint recognition device Finger vein recognition device, face recognition device, iris recognition device, card reader, electronic anti-theft lock, fingerprint anti-theft lock, electric lock controller, (networked) video intercom system, etc.; electronic patrol system information collector, patrol Better, information buttons, etc.; parking lot management system barriers, access controllers, parking garage (yard) security management system, etc.;
Car anti-theft alarm system:
Car anti-theft alarm, motorcycle anti-theft device, vehicle anti-robbery and anti-theft network alarm system, etc.; other UV remake, counterfeit banknote discriminator, multi-channel psychological test system, lithium battery, etc.;
Communication products:
Cluster hand platform, cluster vehicle platform, cluster signaling system, cell phone signal shield, base station, frequency jammer, police digital trunking (PDT) communication system, public security dedicated wireless video and audio transmission system equipment, TETRA digital trunking communication system, TETRA digital trunking mobile station, TETRA digital trunking vehicle station, etc.;
Safety explosion-proof products:
Portable X-ray security inspection equipment, micro-dose X-ray security inspection equipment, micro-dose transmission X-ray human security inspection equipment, hand-held metal detector, through-type metal detection gate, trace drug/explosive detection based on ion mobility spectroscopy Instrument, illegal liquid inspection instrument, cargo transportation micro-dose X-ray safety inspection equipment, vehicle safety inspection system, etc.;
Road traffic products:
Vehicle driving recorder, vehicle electronic alarm, special vehicle sign lamps, vehicle-mounted road traffic information display screen, road traffic signal control machine, vehicle display screen, road traffic signal lamp, accident site survey vehicle lighting equipment, LED road traffic guidance Sign change, motor vehicle speedometer, traffic illegal evidence collection equipment, exhaled gas alcohol content detector, red light automatic recording system, highway vehicle intelligent monitoring and recording system, motor vehicle number plate recognition equipment, motor vehicle driver pile test system, police vehicle Central control system, GPS positioning system (terminal), etc.;
Card products:
Digital photos for second-generation resident ID card production, second-generation resident ID card portrait collection system, second-generation resident ID card reader, second-generation resident ID card reader, IC card chip, electronic passport ;
Anti-counterfeit products:
Anti-counterfeiting marks, anti-counterfeiting materials, anti-counterfeiting identification cards
Security entity protection products:
Including anti-theft security door, vault door, anti-trailing door, building intercom door; anti-theft safe, anti-theft safe, combination safe deposit box (library), mobile vault; mechanical anti-theft lock, electronic anti-theft lock, fingerprint anti-theft lock, various civilian locks, Cash box, bulletproof door, bulletproof glass, smashproof glass.
Anti-riot equipment (including single police equipment):
Anti-riot clothing, anti-stab clothing, anti-cut gloves, anti-riot shields, blocking roadblocks, handcuffs, batons, shackles, tear sprayers, police-standard knives, etc.
submit
Ministry of Public Security product testing standards:
1. Electronic alarm for vehicles GB 8108-1999 "Electronic alarm for vehicles"
2. Intrusion detector GB 10408.1-2000 "Intrusion detector Part 1: General requirements"
3. Ultrasonic Intrusion Detector GB 10408.2-2000 "Intrusion Detector Part 2: Ultrasonic Doppler Detector for Indoor Use"
4. Microwave Intrusion Detector GB 10408.3-2000 "Intrusion Detector Part 3: Microwave Doppler Detector for Indoor Use"
5. Active infrared intrusion detector GB 10408.4-2000 "Intrusion detector Part 4: Active infrared intrusion detector" 6 Indoor passive infrared detector GB 10408.5-2000 "Intrusion detector Part 5: Indoor passive infrared detector 》
6. Microwave and passive infrared composite intrusion detector GB 10408.6-1991 "Microwave and passive infrared composite intrusion detector"
7. Vibration intrusion detector GB/T 10408.8-2009 "Vibration intrusion detector"
8. Passive glass break detector GB 10408.9-2001 "Intrusion detector Part 9: Passive glass break detector for indoor use"
9. Black and white universal application TV camera GB 12338-1990 "Black and white general application TV camera measurement method"
10. Anti-theft alarm controller GB 12663-2001 "General technical conditions for anti-theft alarm controller"
11. Metal detector GB 12899-2003 "General technical specification for hand-held metal detector"
12. Video Intrusion Alarm GB 15207-1994 "Video Intrusion Alarm"
13. Magnetic switch intrusion detector GB 15209-2006 "Magnetic switch intrusion detector"
14. Metal detection door GB 15210-2003 "General technical specification for pass-through metal detection door"
15. Obstructed microwave intrusion detector GB 15407-1994 "Technical requirements and test methods of obscured microwave intrusion detector"
16. Video security monitoring digital recording equipment GB 20815-2006 "Video security monitoring digital recording equipment"
17. Optical transceiver GB/T 13997-1999 "2048kbit/s,...139264kbit/s optical transceiver technical requirements", YD/T 730-94 "optical transceiver technical index test method"
18. Monitor GB/T 14858-1993 "General technical conditions for black and white monitors", SJ/T 10603-1994 "General technical conditions for color monitors", SJ/T 10604-1994 "Measurement methods for color monitors"
19. Applied TV camera gimbal GB/T 15412-1994 "General technical conditions for applied TV camera gimbal"
20. Color camera GB/T 15865-1995 "Camera (PAL/SECAM/NTSC) measurement method Part 1: Non-broadcast single sensor camera"
21. Alarm image signal wired transmission device GB/T 16677-1996 "Alarm image signal wired transmission device"
22. Automobile driving recorder GB/T 19056-2003 "Automobile driving recorder", GB/T 19056-2003 "Automobile driving recorder" National Standard No. 1 amendment, GB 7258-2004 "Motor vehicle operation safety technical conditions 》
23. Road Traffic Signal Controller GA 47-2002 "Road Traffic Signal Controller"
24. Motor vehicle speedometer GA 297-2001 "General technical conditions for motor vehicle speedometer"
25. Exhaled gas alcohol content detector GA 307-2001 "Exhaled gas alcohol content detector"
26. Highway Vehicle Intelligent Monitoring and Recording System GA 497-2004 "Highway Vehicle Intelligent Monitoring and Recording System" 35 Psychological Testing System GA 544-2005 "General Technical Specification for Multi-channel Psychological Testing System"
27. Louyu intercom system and electronically controlled anti-theft door GA/T 72-2005 "General technical conditions for Louyu intercom system and electrically controlled anti-theft door"
28. Video intercom system GA/T 269-2001 "Black and white video intercom system"
29. Access control, entrance and exit control system GA/T 394-2002 "Technical requirements for entrance and exit control system"
30. Automatic red light recording system GA/T 496-2004 "Automatic red light recording system"
31. Vehicle positioning (GPS) alarm system GB 20816-2006 "Vehicle Anti-theft Alarm System Passenger Car", GB/T 19392-2003 "General Specification for Automotive GPS Navigation System"
32. Vehicle Anti-robbery Anti-theft Network Alarm System Management Center GA/T 553-2005 “General Technical Conditions for Vehicle Anti-robbery Anti-theft Network Alarm System” 42 Electronic Inspection System GA/T 644-2006 “Technical Requirements for Electronic Inspection System”
33. Video Security Monitoring System Variable Speed Dome Camera GA/T 645-2006 "Video Security Monitoring System Variable Speed Dome Camera"
34. Networked Video Intercom System GA/T 678-2007 "Technical Requirements for Networked Video Intercom System"
35. Parking garage (yard) management system GA/T 761-2008 "Technical requirements for parking garage (yard) safety management system"
36. Video security monitoring system matrix switching equipment GA/T 646-2006 "General technical requirements for video security monitoring system matrix switching equipment"
37. Applied TV equipment SJ/T 10658-1995 "Environmental requirements and test methods for general-purpose applied TV equipment", GB 14861-1993 "Safety requirements and test methods for applied TV equipment"
38. Video control equipment SJ/T 11121-1997 "General technical conditions for application of TV video control equipment"
49 Electronic Projector GB/T 19259-2003 "General Technical Conditions for Video Projectors", SJ/T 11298-2003 "General Specification for Digital Projectors", SJ/T 11346-2006 "Measurement Methods for Electronic Projectors", SJ/T 11340-2006 "General Specification for LCD Projectors", SJ/T 11338-2006 "General Specification for LCD TV Rear Projection Displays", SJ/T 11344-2006 "Measurement Methods for Digital TV LCD Rear Projection Displays"
39. Wireless image transmission system Specification of wireless image transmission system
40. Anti-theft safe GB 10409-2001 "Anti-theft safe"
41. Anti-theft safety door GB 17565-2007 "General technical requirements for anti-theft safety door", DB 31/321-2004 "General technical requirements for anti-theft fire safety door"
42. Bulletproof glass GB 17840-1999 "Bulletproof glass", GA 165-1997 "Bulletproof composite glass"
43. Automatic Teller Machine (ATM) GB/T 18789-2002 "General Specification for Automatic Teller Machine (ATM)"
44, stab-resistant clothing GA 68-2003 "stab-resistant clothing"
45. Anti-theft safe GA 166-2006 "Anti-theft safe"
46. Bicycle stealth anti-theft lock GA 245-2000 "Bike stealth anti-theft lock"
47. Police bulletproof helmet and mask GA 293-2001 "Police bulletproof helmet and mask"
48. Electronic anti-theft lock GA 374-2001 "electronic anti-theft lock" 63 anti-riot clothing GA 420-2003 "anti-riot clothing"
49. Riot shield GA 422-2008 "Riot shield"
50. Bulletproof Shield GA 423-2003 "Bulletproof Shield"
51. Bank safe deposit boxes GA 501-2004 "General technical conditions for bank safe deposit boxes"
52. Specifications for the installation of transparent protective barriers in bank business premises GA 518-2004 "Code for the installation of transparent protective barriers in bank business premises"
53. Supervisory door GA 526-2005 "Supervisory door"
54. Anti-trailing interlocking safety door GA 576-2005 "General technical requirements for anti-trailing interlocking safety door"
55. Explosion-proof composite glass GA 667-2006 "Explosion-proof composite glass"
56. Fingerprint anti-theft lock GA 701-2007 "General technical conditions for fingerprint anti-theft lock"
57. Withdrawal box GA 746-2008 "Withdrawal box"
58. Portable anti-theft security box GA/T 3-1991 "Portable anti-theft security box"
59. Mechanical anti-theft lock GA/T 73-1994 "Mechanical anti-theft lock"
60. Metal handcuffs GA/T 172-2005 "Metal handcuffs"
61. Rubber baton GA/T 217-1999 "rubber baton"
52. Metal Shackles GA/T 237-2005 "Metal Shackles"
53. Puncture deflation type roadblock GA/T 421-2003 "Puncture deflation type roadblock"
54. Telescopic baton GA/T 429-2003 "Telescopic baton"
55. Bicycle lock QB 1001-2006 "Bicycle lock"
56. Billiard furniture lock QB/T 1621-1992 "Billiard Furniture Lock"
57. Billiard padlock QB 1918-1993 "Pinball padlock"
58. Magnetic card door lock QB/T 1920-1993 "Technical Conditions of Magnetic Card Door Lock"
59. Exterior door lock QB/T 2473-2000 "External door lock"
60. Billiard Mortise Door Lock QB /T 2474-2000 "Slider Mortise Door Lock"
61, blade mortise door lock QB /T 2475-2000 "blade mortise door lock"
62. Ball door lock QB /T 2476-2000 "Ball door lock"
63. Door closer QB /T 2698-2005 "door closer"
64. Aluminum alloy window lock QB /T 3890-1999 "Aluminum alloy window lock"
65. Aluminum alloy door lock QB /T 3891-1999 "Aluminum alloy door lock"
64. Computer Information System GB 17859-1999 "Guidelines for the Classification of Computer Information System Security Protection Level"
Article supplement (test report of the Ministry of Public Security for smart lock products):
Smart lock points: fingerprint lock and electronic lock!
1.1. The smart lock with fingerprint function is divided into fingerprint locks. According to the industry standard: GA701-2007 fingerprint anti-theft lock general technical conditions, make a test report of the Ministry of Public Security.
1.2. Other types of smart locks without fingerprint function: such as face recognition smart lock, iris smart lock, combination lock, wireless remote control lock, etc., are divided into electronic locks, according to the industry standard GA374-2019 electronic anti-theft lock for the Ministry of Public Security report.
1.3. Special note: All smart locks are counted as electronic locks, so fingerprint locks are also counted as electronic locks, which can be tested according to the standard of electronic locks.
2. Intelligent lock detection and process
The smart lock is used as the test report of the Ministry of Public Security. According to different locks, different industry standard tests are selected, and the test requirements are slightly different.
2.1. Supporting lock cylinders must have the inspection report of the Ministry of Public Security and provide an application
2.2. Samples: 3 sets of samples are required, including 2 sets of lock frames, 1 set of bulk, with lock body.
2.3 General process:
1. Determine the test items and standards 2. Prepare the prototype 3. Prepare to send the sample 4. Arrange the test 5. Issue the report
3. Inspection category
There are two types of inspection: commissioned inspection and type inspection.
3.1. Entrusted inspection: The enterprise sends samples to the testing center for testing, and tests according to the line standard or enterprise standard.
3.2. Type inspection: Only products with national or industrial standards can be type inspected; samples must be taken through the testing center of the Ministry of Public Security. The above two requirements must be met at the same time before the type test.
3.3. Selection of categories: As there are industry standards for smart locks, type testing can be done after sampling samples are taken by the testing center of the Ministry of Public Security. There is no sampling process, even if it is tested according to industry standards, it can only be commissioned.
4. Difficulties in inspection
Intelligent lock detection is divided into A and B levels. Generally speaking, projects and projects can meet the needs using A level, and B level has higher product requirements.
Common unqualified items include: lock bolt pressure, lock bolt anti-drilling, anti-disassembly alarm, wrong operation alarm, flame retardant, fingerprint module static test and other unqualified.
5. Inspection report
5.1 Type inspection report
